Views: 220 Author: Cristian Publish Time: 2026-04-16 Origin: https://www.agro-ltm.com/products.html
Whether you are a procurement manager for an agricultural cooperative or an individual farm owner, choosing the right tractor requires careful consideration of horsepower, turbocharging configuration, overall weight, tyre specifications, and how to use the PTO (Power Take-Off). This comprehensive guide covers all these essential topics to help you make an informed decision.
About Shandong Lifetree Machinery Co., Ltd.
We specialize in manufacturing tractors ranging from 25 to 300 horsepower, exporting to countries and regions worldwide. For inquiries or orders, contact us 24/7 via WhatsApp: +86 178 6293 9397.
A turbocharged tractor (also known as Tractores con Turbo in Spanish) is a tractor equipped with a turbocharger on its engine. The turbocharger uses exhaust gases to spin a turbine, which forces more compressed air into the combustion cylinders — significantly boosting power output without increasing engine displacement.
Many users search for "de tractores con turbo" or "de tractores con turbu" — both terms refer to the same product category: tractors fitted with turbocharging systems.
· Greater Power Output: A turbocharged engine can deliver 20%–40% more horsepower than a naturally aspirated engine of the same displacement. For example, an 80HP naturally aspirated engine can reach 100–110HP with a turbo.
· High-Altitude Performance: At higher elevations, thin air causes naturally aspirated engines to lose power. Turbocharging compensates for the reduced air density, maintaining consistent performance.
· Better Fuel Efficiency: Turbocharging promotes more complete fuel combustion, delivering greater power while consuming fuel more economically.
· Higher Torque at Low RPM: Turbocharged engines produce strong torque at lower engine speeds, making them ideal for heavy-duty tasks like plowing and deep subsoiling.
"How much does a small tractor cost?" is one of the most common questions we receive from international customers. In general, small tractors (typically in the 25–60HP range) are priced based on the following factors:
1. Horsepower: The price difference between a 25HP and a 60HP tractor can more than double.
2. Drive Type: Two-wheel drive (2WD) models are typically 15%–25% cheaper than four-wheel drive (4WD) models.
3. Transmission Type: Mechanical shift, hydraulic shift, and power shift — each step up adds to the cost.
4. Brand & Origin: Chinese brands like Shandong Lifetree offer significant cost advantages over European and American brands at equivalent specifications.
5. Optional Features: Air-conditioned cab, number of hydraulic outlets, PTO speed options, and other configurations all affect the final price.
HP Range | Drive Type | Suitable Applications |
25–35 HP | 2WD / 4WD | Orchards, vegetable gardens, small-scale farming |
40–50 HP | 4WD | Small to medium farms, transport |
55–60 HP | 4WD | Medium-scale farmland, multi-purpose use |
�� Actual pricing depends on specific configurations, order quantity, and shipping destination. Contact us via WhatsApp: +86 178 6293 9397 for a personalized quote.
Tractor tyres (also spelled "tires") are important consumable and wear parts. Their cost depends on size, brand, tread pattern, and other factors:
Tyre Type | Common Sizes |
Front Tyres | 7.50-16 / 8.3-20 / 9.5-24 |
Rear Drive Tyres | 11.2-24 / 12.4-28 / 14.9-30 |
Large Rear Tyres | 18.4-34 / 18.4-38 / 20.8-42 |
Paddy Field Tyres | Various deep-tread models |
· Match the tread to your terrain: Use standard treads (R1) for dry land, deep-lug treads (R1/R2) for paddy fields, and radial tyres (R1W) for multi-purpose use.
· Consider tyre width for soil conditions: On soft soil, wider-section tyres reduce ground pressure and minimize compaction.
· Check the Ply Rating: For heavy-duty operations, choose higher ply ratings (e.g., 12PR, 14PR) to ensure adequate load capacity.
Knowing a tractor's weight is essential for transport planning, bridge and road load assessments, and soil compaction management. Here is a reference table for common horsepower ranges:
HP Range | Operating Weight | Typical Applications |
25–35 HP | 1,200 – 1,800 kg | Orchard management, small-scale farming |
40–60 HP | 1,800 – 2,800 kg | Small to medium farmland, transport |
70–100 HP | 3,000 – 5,000 kg | Medium to large-scale farming |
120–180 HP | 5,500 – 8,500 kg | Large farms, deep subsoiling |
200–300 HP | 9,000 – 14,000 kg | Extra-large farmland, industrial towing |
Factors that influence tractor weight include: engine type, cab configuration (with or without A/C), number of wheel weights, and tyre specifications. Different configurations within the same HP range can vary by 500–1,000 kg.
Many users search for "how much does a tractor tyre weight" and "how much does a tractor wheel weight" — this information is critical for handling, replacement, and transport planning.
Tyre Size | Tyre Only | Tyre + Rim Assembly |
7.50-16 (Front) | Approx. 15–20 kg | Approx. 30–40 kg |
9.5-24 (Front) | Approx. 30–40 kg | Approx. 55–75 kg |
11.2-24 (Rear) | Approx. 35–50 kg | Approx. 70–100 kg |
12.4-28 (Rear) | Approx. 50–70 kg | Approx. 100–140 kg |
14.9-30 (Rear) | Approx. 70–100 kg | Approx. 140–200 kg |
18.4-34 (Rear) | Approx. 120–170 kg | Approx. 250–350 kg |
18.4-38 (Rear) | Approx. 140–190 kg | Approx. 280–400 kg |
20.8-42 (Large Rear) | Approx. 180–250 kg | Approx. 380–520 kg |
⚠️ Large rear tractor tyres with rims can weigh 300–500 kg. Always use professional lifting equipment when changing tyres, and ensure the engine is off and the parking brake is engaged. Never perform tyre work on unstable ground.
The PTO (Power Take-Off) is one of the most important power transmission interfaces on a tractor. It transfers engine power to rear-mounted implements such as rotary tillers, mowers, seeders, and sprayer pumps.
Common PTO speed standards:
· 540 RPM: Most common; suitable for the majority of small to medium implements.
· 750 RPM: Used by some mid-size implements.
· 1000 RPM: For large implements such as heavy-duty mowers and straw return machines.
· Ground Speed PTO: Synchronized with travel speed; used for planters and similar equipment.
6. Stop and shut off the engine: When connecting an implement for the first time or after extended downtime, always shut off the tractor first.
7. Inspect the connection: Confirm the PTO shaft is properly installed, the safety shield is intact, and the universal joint (U-Joint) angle is within the acceptable range.
8. Start the engine: Start the tractor and allow it to idle until the coolant reaches normal operating temperature.
9. Operate the PTO lever / button: Mechanical PTO: Locate the PTO lever near the seat or dashboard, and slowly push forward or pull up to the "Engage" position. Electro-hydraulic PTO: Press the PTO switch on the dashboard; the indicator light confirms engagement. Hydraulic PTO: Use the hydraulic control lever to engage the PTO clutch.
10. Gradually increase RPM: After engaging the PTO, slowly increase the throttle to the rated PTO speed. Avoid sudden acceleration to prevent shock to the drivetrain.
11. Check operation: Verify that the implement is running smoothly with no abnormal vibration or noise.
⚠️ Never approach rotating components while the PTO is engaged! Never step over a spinning PTO shaft! Always disengage the PTO and shut off the engine before leaving the operator's seat. PTO-related accidents cause numerous injuries and fatalities every year — safe operation is critical.
· Replacing or servicing an implement
· Worn universal joints need replacement
· Damaged safety shield requires repair or replacement
· Switching to a different shaft length to match another implement
· Safe removal before long-term storage
Step 1: Safety Preparation
12. Park the tractor on flat, firm ground.
13. Shut off the engine and remove the key to ensure the engine cannot start.
14. Wait for the PTO shaft and implement to come to a complete stop.
15. Engage the parking brake and place wheel chocks under the tyres.
Step 2: Disconnect from the Tractor End
16. Locate the connection between the PTO shaft and the tractor's PTO output shaft.
17. Most tractors use a 6-spline or 21-spline connection.
18. Press or pull the lock pin / spring clip to release the locking mechanism.
19. Grip the shaft guard and pull straight outward to disengage from the tractor's PTO splines.
Step 3: Disconnect from the Implement End
20. Walk to the implement end and locate the other side of the shaft connection.
21. Repeat the same locking mechanism release procedure to pull the shaft free from the implement's input shaft.
22. If the connection is tight, gently rotate the shaft to align the splines, then pull outward.
Step 4: Storage and Maintenance
23. Store the removed PTO shaft vertically or lay it flat in a dry location.
24. Inspect the universal joint cross for looseness; apply grease if necessary.
25. Check that the telescoping tube slides smoothly; clean and lightly grease if needed.
26. Verify the safety shield is intact and spins freely.
�� What if the PTO shaft won't come off? First, confirm the locking mechanism is fully released. If the splines are seized due to corrosion, spray a penetrating lubricant (such as WD-40), wait 10–15 minutes, then gently rotate and pull outward. Never strike the shaft directly with a hammer, as this can damage the splines.
· �� Professional Manufacturing: Specializing in 25–300HP tractors with a complete product line.
· �� Global Export: Our products are exported to Africa, South America, Southeast Asia, Central Asia, and many other regions.
· �� Turbocharging Technology: Mid to high horsepower models are all equipped with turbocharged engines for powerful, fuel-efficient performance.
· �� Excellent Value: Compared to European and American brands, we offer significant cost advantages at equivalent specifications.
· �� Customization: We support custom PTO speeds, tyre specifications, cab configurations, and more.
· �� 24/7 Service: WhatsApp support around the clock: +86 178 6293 9397
Q1: What is the difference between a turbocharged tractor and a regular tractor?
A turbocharged tractor uses a turbocharger to force more compressed air into the cylinders, delivering 20%–40% more power at the same displacement. It also offers better high-altitude performance and improved fuel efficiency.
Q2: How much does a 25–60HP small tractor cost?
Tractor pricing depends on horsepower, drive type, transmission, and optional features. Contact us for a detailed quote tailored to your needs.
Q3: How much does a rear tractor tyre weigh?
Depending on the size, a single rear tyre weighs between 35 kg and 250 kg. With the rim assembly, large rear wheels can weigh 300–500 kg. Always use professional equipment and follow safety procedures during tyre changes.
Q4: How much does a tractor weigh in total?
25–35HP compact tractors weigh approximately 1,200–1,800 kg; 70–100HP models weigh around 3,000–5,000 kg; and 200–300HP large tractors can reach 9,000–14,000 kg.
Q5: How do I safely engage and remove a PTO shaft?
Before engaging, ensure the engine is idling and the shaft is properly installed; engage slowly and gradually increase RPM. To remove, shut off the engine first, release the locking mechanism, and pull straight outward. See Chapters 6 and 7 for detailed instructions.
────────────────────────────────────────────────────────────
About the Author: Shandong Lifetree Machinery Co., Ltd. Technical Team
Product Range: 25–300HP Tractors | Contact: WhatsApp +86 178 6293 9397 (Available 24/7)
Copyright: Original content by Shandong Lifetree Machinery. Please credit the source when reprinting.
