How to Plow a Field with a Tractor: Professional Techniques & Step-by-Step Guide

Introduction: The Importance of Plowing in Agricultural Production

Plowing is the foundational step in agricultural production, directly impacting soil aeration, water retention, and crop growth. Proper plowing techniques can increase sowing efficiency by 30%, reduce weed growth, and lay the groundwork for bountiful harvests. As a professional manufacturer of agricultural implements and tractors, Shandong Life Tree Machinery Co., Ltd. (referred to as LTM) has extensive experience in agricultural machinery. This article will detail the entire process of tractor plowing, combining LTM's technical expertise.

I. Pre-Plowing Preparation

1. Soil Condition Assessment

• Optimal Timing: Soil moisture should be between 20%-30% (forms a ball when squeezed but breaks apart when dropped)

• Avoid Extreme Conditions: Plowing overly wet soil causes compaction; excessively dry soil leads to clumping

• Clear Obstacles: Remove rocks, roots, and debris to prevent damage to tractor blades

2. Tractor and Implement Selection

Shandong Life Tree Machinery Co., Ltd. (LTM) recommends selecting equipment based on field size and soil type:

• Small Fields (under 10 mu): LTM-25HP tractor + 1L series single-direction plow

• Medium Fields (10-50 mu): LTM-50HP tractor + 2L series double-direction plow

• Large Fields (over 50 mu): LTM-100HP tractor + 3L series hydraulic reversible plow
  (For more model specifications, visit our official website: www.agro-ltm.com)

3. Safety Inspection Checklist

• Tractor inspection: Check tire pressure (front tires 1.2-1.5bar, rear tires 1.8-2.0bar), brake system, and hydraulic oil level

• Implement inspection: Check plowshare wear (recommended to replace with new plowshares; genuine LTM parts available through official website)

II. Tractor Plowing Operation Steps

1. Implement Installation and调试

1. Connect the plow to the tractor's three-point hitch system, insert safety pins, and lock securely

2. Adjust top link length to maintain a 15°-20° angle between plow frame and ground

3. Test lifting function with hydraulic control lever to ensure smooth operation (LTM tractors feature enhanced hydraulic systems with 0.3-second fast response)

2. Depth and Width Settings

• Depth Adjustment: Set via depth-limiting wheels on the plow; recommended depth is 25-30cm for general crops (up to 35cm for deep-rooted crops)

• Width Adjustment: Overlap adjacent plow passes by 5-8cm to avoid missed areas 

3. Standard Operating Procedure

1. Start Phase: Drive straight at low speed (1-2 gears), gradually accelerate to working speed (3-5km/h) after plow enters soil

2. Turning Technique: Lift plow before turning at field edges, reduce engine speed, and avoid sharp turns (LTM tractors' differential lock system reduces soil compaction during turns)

3. Operating Route: Use "rectangular" or "shuttle" patterns to minimize empty driving (LTM intelligent navigation system recommended, saving 15% fuel consumption)

III. Practical Tips for Efficient Plowing

1. Special Soil Treatment Solutions

• Clay Soil: Use LTM's corrugated moldboard to reduce soil adhesion, increasing productivity by 0.5 mu per hour

• Sandy Soil: Reduce forward speed to 2-3km/h and use a press wheel to prevent water and soil loss

IV. LTM Agricultural Machinery After-Sales Support

Shandong Life Tree Machinery Co., Ltd. (LTM), as a professional manufacturer of agricultural implements and tractors, provides global customers with:

• 24-hour Technical Support: WhatsApp online customer service (+8617862939397) for real-time operational assistance

• Original Parts Supply: Official website (www.agro-ltm.com) parts mall supports global delivery

• Customized Solutions: Design of special plows according to customer needs (e.g., deep plows for medicinal herbs)

V. Precautions and Maintenance

1. Operating Time: Avoid working during midday heat (recommended: 6-10 AM and 4-7 PM) to reduce mechanical overheating

2. Daily Maintenance: Clean plow after each use, inspect plowshare wear, and apply anti-rust oil

3. Seasonal Storage: When not in use for extended periods, store plows in a suspended position and inflate tires to 80% of standard pressure

For more questions about tractor plowing techniques, feel free to contact us through:
24-hour Online Customer Service WhatsApp: +8617862939397
Official Website: www.agro-ltm.com